My omni does not appear to be tracking correctly. Please Help

My omni sat around unassembled for six months or more. I finally decided to set it up again and do the firmware updates and what not. After doing so it appears no to be tracking the direction(the ring) properly. The following gif show my info screen, I was not moving while this was recorded
I have run the calibration to with no improvement. Any suggestions would be greatly appreciated.

Answers

  • flamaestflamaest Posts: 111
    I wonder if you Omni main board is hosed? Might wan to contact support.
  • mantonyzmantonyz Posts: 3
    @flamaest I was thinking that might be the issue also. I think I found the real culprit.
    I found this while packing it up because I am moving soon and unfortunately my omni will be in storage for a few months at least. I'm going to replace the crushed cable but won't be able to test it for some time.
Sign In or Register to comment.